If you have researched home security systems at all, you have probably come across driveway alarms. These are extremely effective at warning you of any person, vehicle, or animal that approaches your house. Wireless driveway alarms are a must have piece to any home security system, and this article will tell you why.

The main question you are probably asking yourself is why are wireless driveway alarms better than wired alarms? There are many reasons why but the most important reason is the cost and effort required for installation.

With a wireless alarm, you simply have to place the motion detector wherever you want it to be, connect a short wire from the detector to the transmitter, and then place the receiver wherever you like. How this works is the transmitter sends a signal to the receiver whenever motion is detected, and the receiver then warns you. The only hard part in that process is you are recommended to bury the short wire so that it cannot be cut.

Now, when you go to install a wired system, you are going to need to find a place for your motion detector. However, rather than having a wireless signal sent from a transmitter to a receiver, you are going to need to connect the detector to the receiver.

What this means is you are going to need to bury a wire from your driveway into your house. This could involve you needing to put the wire under your cement, and it will definitely involve you cutting a hole into your home, all of which is expensive.